Focus lock
To focus on a subject not positioned in the centre of the picture, use the focus lock function.
Using the Focus Lock
1.Ensure the subject is in the centre of the autofocus frame.
2.Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture.
3.With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be cancelled.
1. The image to be | 2. Press the SHUTTER | 3. Recompose the picture |
captured. | button halfway and | and fully depress the |
| focus on the subject. | SHUTTER button. |
Flash (
) / Left button
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab.
When the menu is not displayed on the 
LCD monitor, the LEFT button operates as 
the FLASH ( 
) button.
[Selecting the Auto flash]
Selecting the flash mode
1.Use the Mode switch to select a mode other than Movie Clip mode. (p.19)
2.Press the Flash button until the desired flash mode indicator is displayed on the LCD monitor.
3.A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment.
Flash range |
|
|
|
| (Unit: m) | ||
ISO | Normal | Macro | Auto macro | ||||
WIDE | TELE | WIDE | TELE | WIDE | TELE | ||
| |||||||
AUTO | 0.8~3.0 | 0.8~2.0 | 0.4~0.8 | 0.5~0.8 | 0.4~3.0 | 0.5~2.0 | |
27
