FAQ
| Win XP | : Trace [Start | Control Panel Performance and |
|
| Maintenance | System Hardware Device Manager |
|
| Universal Serial Bus controller]. | |
| There must be USB Host Controller and USB root hub under [Universal serial bus | ||
| controller]. |
|
|
| When all the conditions mentioned above are met, the computer can support the | ||
| USB interface. |
|
|
[Case 7] | When using the USB hub. |
| |
| There may be a problem in connecting the camera to the PC through the USB | ||
| hub if the PC and the hub are not compatible. Wherever possible, connect the | ||
| camera to the PC directly. |
| |
[Case 8] | Are other USB cables connected to the PC? | ||
| The camera may malfunction when it is connected to the PC at the same time as | ||
| another USB cable. In this case, disconnect the other USB cable, and connect | ||
| only one USB cable to the camera. |
Please check the following if you encounter a problem while running DigiStudio.
[Case 1] | My PC slows down when I launch DigiStudio. |
| Check the system requirements for the installation of DigiStudio. |
| If your PC does not meet the recommended system requirements for the |
| installation, your PC may run slowly. |
124