Connecting to a Power Source

Using the batteries

: If the camera does not turn on after you have inserted batteries, please

 

check whether the batteries are inserted with the polarity(+ and-).

1. Open the battery chamber

2. Insert the batteries according

cover by pushing in the

to the polarity marks (+ and -)

direction of the arrow.

on the back of the battery

 

chamber cover.

3.To close the battery chamber cover, push it until it clicks.

Removing the battery

1. Turn off the camera power. Open the battery chamber cover and move the battery holder aside. The battery will be released.

2. Take out the battery and close the battery chamber cover.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery indicator

 

 

 

The batteries are fully

There is no battery

Battery status

Prepare new batteries. capacity. Replace with

 

charged.

new batteries.

 

 

Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)

The Digimax Battery Pack is a rechargeable external Li-ion battery for use with most digital cameras. These optional battery packs provide long lasting power and their operating performances are much improved over Ni-MH and Alkaline batteries. This is due to the mass storage lithium ion cell. Refer to the illustrations

15