PictBridge: Picture Printing

Printing Pictures

1.Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58)

2.The [PICTBRIDGE] menu will appear.

3.Use the UP and DOWN buttons to select the [PRINT] menu, and then press the OK button.

PICTBRIDGE

IMAGES

00 PRINTS

SETUP

CUSTOM

 

 

PRINT

 

 

 

MOVE:

SET:OK

4. The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. If you press the SHUTTER button during printing, printing will be cancel and the menu from Step 2 will appear.

STOP:SHUTTER

5. If an error occurs during printing, the screen shown below will appear.

 

 

 

 

 

 

 

 

 

 

 

FATAL ERROR

 

 

 

WARING

 

 

 

 

 

 

 

 

RESUME:OK

 

 

 

 

 

 

 

 

CANCEL:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET:OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ Fatal error ]

Press the OK button to cancel printing. Follow the Steps 1 to 4 again to print the picture(s).

[ Recoverable error ]

Press the OK button to resume printing, or press the RIGHT button to cancel printing.

INFORMATION

When printing pictures by connecting the camera to the printer, use the AC adapter.

If the printer is turned off during printing, the printing will stop and the paper will be dispelled. If there are continuous print error, please check the print condition.

61