Imprinting the recording date

INFORMATION

The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting.

TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 12 hour clock.

The imprint function is applied only to still images.

Function lamp

You can turn on and off the function lamp located on the front of the camera.

Setting the function lamp

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [LAMP] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

If [OFF] is selected

: The fucntion lamp will not light up.

If [ON] is selected

: The function lamp will light up.

5.Press the menu button twice and the menu will disappear. Description of the Function lamp

SETUP

DATE

IMPRINT OFF

LAMP ON

BACK: SET:OK

Function

Description

 

 

During power-on

7 color lights blink and then turns off when the camera is ready to take a picture

 

 

After an image is captured

The green lamp will blink once.

 

 

While recording a movie clip

The purple lamp will blink at a 1-second interval.

 

 

During voice recording

The blue lamp will blink at a 1-second interval.

 

 

When the self-timer is

Even if the function lamp is set to OFF, the self-timer LED will

activated

work. (See page 30.)

 

 

68