Getting started

2 After fully charging, disconnect the headset from the charger.

To save energy, unplug the charger when not in use. The charger does not have a

power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Checking the remaining battery power

Press the Power button. The indicator lights will alert you to the remaining battery power.

Colour

Battery power
Flashes red three times

Less than 30 %

Flashes violet three times

30-60 %

Flashes blue three times

60-100 %

 

 

 

Turning the headset on and off

To turn the headset on, press and hold the Power button for one second. The indicator light will flash blue three times.

To turn the headset off, press and hold the Power button for approximately four seconds. The indicator light will flash red three times.

Follow all posted warnings and directions from authorised personnel in areas where the use of wireless devices is restricted, such as aeroplanes and hospitals.

English (UK)

8

6