ŝ202Ş
Setting the Exposure
ƈChoose the part of the screen to use for measuring brightness and determining exposure.
(Multi-segment metering), (Center-weighted metering) or (Spot metering) mode can
be selected. The default setting is (Multi-segment metering).
ƃThe center-weighted metering mode is automatically set even if you select the multi-segment
metering mode when using a lens other than the D-XENON, D-XENOGON lens (can only be
used if permission is set in [Use Aperture Ring] in the [CUSTOM2 MENU] menu). (p.142)
ƃYou can link the exposure and AF point in the focusing area during multi segment metering.
(p.131)
INFORMATION
ƃSet with the metering mode lever.
ƈThe scene in the viewfinder is metered in 16 different zones as
shown in the illustration when using the multi-segment metering.
This mode automatically determines what level of brightness is in
which portion.
Multi-segment
metering
Center-weighted
metering
Spot metering
Selecting the Metering Method
Using the Multi-Segment Metering
Segment the screen in 16 parts, meter each portion and determine
the appropriate exposure.
Measure the entire screen with an emphasis on the center and
determine the exposure.
Measure only the center of the screen and determine exposure.