ŝ73Ş
Using the Built-in Flash
3. Press the shutter release button halfway.
The focus indicator appears in the viewfinder when focused.
4. Press the shutter release button fully. The picture is taken.
5. Push down on the portion indicated in the illustration to retract
the flash.
2. Press the button.
The built-in flash pops up if necessary and begins charging.
Regardless of the Flash mode, the Fill-in flash will be
selected.
When the flash is fully charged, appears in the LCD
panel and viewfinder.
1. Set the mode dial to any recording mode except for the Auto mode.
Using Fill-in Flash ,