ŝ66Ş
Other Shooting Modes
4. Use the four-way controller (ȜȞ) to select or .
The self-timer lamp will blink to let you know that the camera is
in remote control wait status.
5. Press the OKbutton twice. The camera is ready to take pictures.
6. Press the shutter release button halfway.
The autofocus system operates. The focus indicator appears in the viewfinder when the
subject is in focus.
ƃYou cannot focus with the remote control unit in default settings. Focus on the subject first before
operating with the remote control. You can set [AF in Remote Control] to [On] in the custom
function. (p.132)
INFORMATION
7. Point the remote control unit towards the front of the camera
and press the shutter release button on the remote control.
The maximum operating distance of the remote control unit is
about 5 m from the front of the camera.
- , the shutter will be released immediately after the
shutter release button is pressed.
- , the shutter will be released approximately 3 seconds
after the shutter release button is pressed.
When the picture is taken, the self-timer lamp lights and will
then resume blinking.
Remote Control
DRIVE
: Set: Move