ŝ56Ş
Turning On the OPS Function
ƈTurn on the OPS switch. When the shutter release button is pressed halfway, appears in the
viewfinder and the OPS function turns on.
ƃTurn the Shake Reduction switch off if you will not use the Shake Reduction function. (OFF)
ƃThe Shake Reduction function will not fully work (for about 2 seconds) right after turning on the
camera or restoring from Auto Power Off. Wait for the Shake Reduction function to become stable
before gently pressing the shutter release button to take a picture. Press the shutter release
button halfway. The camera is ready to take pictures when icon appears in the viewfinder.
ƃBe sure to turn off the OPS switch when using the camera with a tripod.
ƃThe Shake Reduction function automatically turns off in the following situations.
When using self-timer, remote control shooting, bulb shooting, or wireless mode with an external
flash.
INFORMATION
OPS (Optical Picture Stabilisation)
Shake Reduction Function and Lens Focal Length
ƈThe OPS function operates by acquiring the lens information such as focal length. If a lens that
information is automatically acquired is used, the [ OPS] setting menu appears but can't be
selected.
If another type of lens is used, the lens information cannot be automatically acquired. In this case, set
the focal length by using the [ OPS] menu.