ŝ68Ş
Other Shooting Modes
ƈUse the Mirror Lock Up function if camera shake is evident even when Cable Switch (optional) or
Remote Control Unit (optional) is used.
When the shutter release button is pressed, the mirror pops up and the shutter is fired 2 seconds later
if the 2 second Self-Timer setting is selected. Avoid camera shake when mirror pops up by using this
method. Follow the procedure below to take a picture with the mirror lock up.
1. Mount the camera to a tripod.
2. Use the Fnbutton and the four-way controller (Ɗ) to select (2 sec. Self-Timer). (p.62)
3. Focus on the subject.
4. Press the shutter release button fully.
The mirror pops up and the picture is taken 2 seconds later. AE lock is enabled with the exposure
value set immediately before the mirror goes up.
Using Mirror Lock Up Function to Prevent Camera Shake