Y O U R N E W T V
Side Panel Jacks
You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 17 – 25.)
ŒPERFECT FOCUS
Press to adjust for the optimum picture set in the Factory.
´VIDEO INPUT jack
Use to connect a video signal from a camcorder or a video game.
ˇ AUDIO INPUT jacks
Use to connect the audio signals from a camcorder or video game.
¨ S-VIDEO INPUT jack
Use to connect an
Using the Component Shelf
You can place a VCR, a DVD player, etc. on the Component Shelf.
HCN479W / HCN559W / HCN659W
1
Press the symbol “ “ in the center of the Component Shelf door.
2 | 3 | 4 |
As shown in figure | After placing a com- | Shut the door by |
below, hold the center | ponent on the shelf, | pressing the “ “ |
of the door and lift it up. | hold the center of the | symbol. |
| door and pull it down as |
|
| shown in figure below. |
|
| Note: When placing a component on | |
➔ | the shelf, make sure it is no more | |
| than 5 inches tall and leave one inch | |
| of space from the front and sides for | |
| ventilation. |
|
13