• For replacement, you will need a
Unplug TV, then use a
1 screwdriver to remove the screws.
2 Remove the Lamp cover.
Remove the 2 press-pin
3 screws securing the Lamp.
Separate the Lamp from the
4 engine by holding the handle and pulling it out.
To reinstall the Lamp, follow
5 these steps in reverse order.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws.
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).
English - 139 
