Samsung HL-R5688W manual Rear Panel Jacks

Your New Wide TV

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV.

For more information, see “Connections”.

English - 14

ŒANTENNA terminals

Two independent cables or antennas can be connected to these terminals. Use “ANT1 IN(CABLE)” and “ANT2 IN(AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 18~19)

´S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to pages 20 and 22)

ˇVIDEO/AUDIO INPUT jacks

Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to page 23)

¨VIDEO/AUDIO OUTPUT jacks

Sends video/audio signals from the TV to an external source, such as a VCR. These jacks are available only in RF, Video and S-Video modes.

ˆCOMPONENT1, 2 jacks (Y, PB, PR, AUDIO L/R)

Use these jacks to connect the component video/audio signals from a DVD player or a Set-Top Box. (Refer to pages 23~24)

ØDVI AUDIO IN (AUDIO L/R)

Connect to the DVI audio output jack of an external device.

∏PC AUDIO INPUT jacks

Connect these to the audio output jacks on your PC. (Refer to page 128)

”SUB-WOOFER OUT jack

Connect to an active SUB-WOOFER. (Refer to page 27)

’Anynet

Please refer to the Anynet Owner’s Instruction. This jack is for connecting to other Samsung Anynet-enabled devices.

˝RS232C

Connect to a computer for reading and loading data information.

ÔDIGITAL AUDIO OUT (OPTICAL) jack

Connect to a Digital Audio Component. (Refer to page 26)

PC VIDEO INPUT jack

Connect these to the video output jack on your PC.

ÒHDMI (High Definition Multimedia Interface)/ DVI INPUT jack (HDMI IN 2/DVI IN)

Connect to the HDMI jack of a device with HDMI output.

These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC) (Refer to pages 24~25)

ÚHDMI (High Definition Multimedia Interface) INPUT jacks (HDMI IN 1)

Connect to the HDMI jack of a device with HDMI output. (Not compatible with PC)

ÆD-Net (IEEE1394) S400 MPEG

Connect to external IEEE1394 digital products such as digital VCRs and camcorders.

Two jacks are provided for this purpose,

which allow for a high degree of flexibility for connecting your D-Net controlled system.

ıSERVICE

This jack is for software upgrades.

˜CableCARDTM

Insert the CableCARD into the slot. (Refer to page 21)

¯G-LINKTM

Connect the IR controller cable to the G-LINKTMterminal on your TV. (Refer to page 104)