Samsung HL-R5667W, HL-R6167W, HL-R5067W manual Rear Panel Jacks

Your New Wide TV

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV. For more information, see “Connections”.

ŒANTENNA terminals

Two independent cables or antennas can be connected to

these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 18~20)

´SERVICE

This jack is for software upgrades.

ˇS-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to page 23)

¨DVI (Digital Video Interface) AUDIO INPUT jacks Connect to the digital audio output jacks of a device with DVI output. (Refer to page 25)

ˆPC AUDIO INPUT jacks

Connect these to the audio output jacks on your PC. (Refer to page 122)

ØVIDEO/AUDIO INPUT jacks

Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to page 24)

∏VIDEO/AUDIO OUTPUT jacks

Sends video/audio signals from the TV to an external source, such as a VCR. These jacks are available only in RF, Video and S-Video modes.

”COMPONENT1, 2 jacks (Y, PB, PR, L, R)

Use these jacks to connect the component video/audio signals from a DVD player or a Set-Top Box. (Refer to pages 24~25)

’DIGITAL AUDIO OUT (OPTICAL) jack

Connect to a Digital Audio Component. (Refer to page 27)

˝G-LINKTM

Connect the IR controller cable to the G-LINKTMterminal on your TV.

ÔAnynet

Please refer to the Anynet Owner’s Instruction. This jack is for connecting to other Samsung Anynet-enabled devices.

PC VIDEO INPUT jack

Connect these to the video output jack on your PC.

ÒHDMI (High Definition Multimedia Interface)/ DVI INPUT jack

Connect to the HDMI jack of a device with HDMI output.

These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Refer to pages 25~26)

ÚD-NET (IEEE1394) S400 MPEG

Connect to external IEEE1394 digital products such as digital VCRs and camcorders.

Two jacks are provided for this purpose, which allow for a high degree of flexibility for connecting your D-Net controlled system.

ÆCableCARDTM

Insert the CableCARD into the slot. (Refer to page 22)

English - 14