![](/images/new-backgrounds/1244310/24431061x1.webp)
Memorizing the Channels
Your TV can memorize and store all of the available channels for both
channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system).
1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
Channel
Antenna | : Air | √ |
Auto Program |
| √ |
Channel Manager |
| √ |
Name |
| √ |
Fine Tune |
| √ |
Signal Strength |
| √ |
LNA | : On | √ |
Move
Enter
Return
2 Press the ENTER button to select “Antenna”.
Press the … or † button to select “Air” or “Cable”, then press the ENTER button.
3 Press the … or † button to select “Auto Program”, then press the ENTER button.
Continued...
Channel
Antenna | Air |
|
: Cable |
| |
Auto Program | Cable |
|
Channel Manager |
|
|
Name |
|
|
Fine Tune |
|
|
Signal Strength |
|
|
LNA | : On |
|
Move | Enter | Return |
Channel
Antenna | : Air | √ |
Auto Program |
| √ |
Channel Manager |
| √ |
Name |
| √ |
Fine Tune |
| √ |
Signal Strength |
| √ |
LNA | : On | √ |
Move | Enter | Return |
NOTE
•All available DTV and analog channels are automatically stored in memory.
English - 31