Samsung HL-S5086W manual Labeling the Channels

Channel Control

Labeling the Channels

Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below the channel number.

Press the CH	or CH	button to tune to the channel that
1 will be labeled.

2 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.

Press the … or † button to select “Name”, then press the ENTER button.

3 Press the … or † button to move to the channel to be assigned to a new name, then press the ENTER button. Press the … or † button to select a letter, a number or a blank. (Results in this sequence: A...Z, 0...9, +, -, ✽, /, blank).

Channel

Antenna	: Air	√
Auto Program		√
Channel Manager		√
Name		√
Fine Tune		√
Signal Strength		√
LNA	: On	√
Move	Enter	Return

Name

		▲
Air	2	A	Clear	OK
		▼
Air	3	-----	Clear
Air	4	-----	Clear
Air	5	-----	Clear
Air	6	-----	Clear
		▼
		Move	Adjust	Return

4 Press the √ button to switch to the next field, which will be selected.

Select a second letter or digit pressing … or † button, as above.

Repeat the process to select the last three digits.

Press the ENTER button.

Name

▲

Air 2 CNN02 Clear

		▼
Air	3	-----	Clear
Air	4		Clear
		-----
Air	5		Clear
		-----
Air	6		Clear
		-----
		▼
		Move	Adjust

OK

Return

After all settings are completed, select “OK” using the √ button. Press the ENTER button to save the settings and return to the previous menu.

To erase the assigned new name, select “Clear” by pressing the œ or √ button, then press the ENTER button.

Press the EXIT button to exit.

NOTE

•If you add or delete a TV channel, the channel label (if set) will also be added or deleted.

English - 54