![](/images/new-backgrounds/1244310/24431051x1.webp)
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently: Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
• The Plug & Play function operates after plugging in the TV for the first time.
1 Press the POWER button on the remote control. The message “Menu language, Channels and Time will be set.” is displayed.
Press the ENTER button, then the Language menu is displayed.
•The Language menu will automatically appear after several seconds, even if the ENTER button is not pressed.
2 Press the ENTER button to enter the language. Press the … or † button to select language, then press the ENTER button. “Selects the antenna to execute the Auto Program Function.” menu is automatically displayed.
•The message to check the connected status of the antenna is displayed.
3 Press the … or † button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.
•If the antenna is connected to ANT 1 IN (CABLE), select “Cable” and if it is connected to ANT 2 IN (AIR), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.
Menu language, Channels and i Time will be set.
Start
Plug & Play
Select the language of the OSD.
LanguageEnglish
Español
Français
Move
Enter
Skip
Plug & Play
Selects the antenna to execute the Auto Program function.
AirStart
CableStart
Air+CableStart
Move
Enter
Skip
Continued...
English - 26