![](/images/new-backgrounds/1137226/13722635x1.webp)
Connections
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a
Find and disconnect the
1 cable that is connected to the ANTENNA IN terminal of your Splitter.
This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. Connect this cable to a
Connect a coaxial cable
2 between an OUT terminal of the splitter and the IN terminal of the Cable box.
Connect a coaxial cable
3 between the ANTENNA OUT terminal of the Cable box and the
Connect another cable
4 between the other OUT terminal on the splitter and the
Connect the last coaxial
5 cable between the OUT terminal of the RF (A/B) switch and the ANT 1 IN (CABLE) on the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing.
Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your
English - 18