21.LIGHTNING:
For added protection of this CAMCORDER during a lightning storm or when it is leR unattended and unused for long periods of time, unplug it from the wall outbt and disconnect the antenna or cabb system, This will prevent damage to the CAMCORDER due to lightning and powerline surges,
22.POWER LINES:
An outside antenna system should not be located in the vicinky of overhead power lines or other electric light or power circuits where it carl fall into such power lines or circuits, When installing an outside antenna system, exlreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal,
23.OVERLOADING:
Do no1 overload wall outlets and extension cords as this can result in a risk of fire or electric shock,
24.OBJECTS AND LIQUIDS:
Newer push objects of any kind into this CAMCORDER through openings as they may touch dangerous vokage points or short out a part that could result in a fire or electric shock. Never
spill liquids of any kind onto the CAMCORDER, Should spillage occur, unplug unit and have it checked by a technician before
use,
25.SERVICING:
Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards, Refer all servicing to qualified service personnel,
26.DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:
Impo_¢ant safety instR,sctions
a.When the
b.If any liquid has been spilled onto, or objects have fallen into the
CAMCORDER.
c.If the CAMCORDER has been exposed to rain or water.
d.If the CAMCORDER does not operate normally by following the operating instructions, adjust only those controls that are covered
by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the CAMCORDER to ks normal operation.
e.If the CAMCORDER has been dropped or the cabinet has been damaged.
f.When the CAMCORDER exhibits a distinct change in
pedormance, this indicates a need for service.
27.REPLACEMENT PARTS:
When replacement parts are required, be sure the service technksian has used replacement parts specified by the manufacturer and having the same characteristics as the original
part, Unauthorized substitutions may result in fire, electric shock or other hazards.
28.SAFELY/CHECK:
Upon compbtion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe)operating order.
29.To prevent damage which may result in fire or shock h_ard, do not expose this appliance to rain or moisture.
30.If this power supply is used at 240V ac, a suitable plug adaptor should be used,
