Basic operation of the camcorder

Drag

Drag the touch screen to up, down, left, or right to select the desired items or files.

Do not place any protective film on the LCD screen.

If you leave a film attached for a long while, strong adhesion between the film and the surface of the screen may cause a malfunction of the touch screen.

• Be careful not to accidentally press the button near the LCD screen while using the touch screen.

The tabs and indicators that appear on the LCD screen depend on the current recording/playback status of your camcorder.

The camcorder does not recognise touches if you touch more than two points on the screen at the same time. Touch one point at a time.

Switching the information display mode

You can switch the on-screen information display mode.

Each time you touch the LCD screen, the full and minimum display modes alternate.

Full display mode

STBY 00:00:00 [253Min]

Minimum display mode

STBY

Warning indicators and messages may appear, depending on the recording conditions. ￿pages 93~97

27