Using with a Windows computer

 

 

USING THE Intelli-studio PROGRAMME

3 Click “Yes” in the new file saving window. The uploading

Intelli-studio is a built-in programme that allows you to play back

procedure starts. Click “Yes” to confirm.

• If you do not want to save any new files, select “No”.

and edit files. You can upload files to web sites, such as YouTube

 

or Flickr. For details, select “Help” ￿ “Help” on the Intelli-studio

 

screen.

 

Step 1. Connecting the USB cable

1Set “USB Connect: Mass Storage” and “PC Software: ON”.

￿page 70

• These are the default settings.

2Connect the camcorder to a PC with the USB cable.

•A new file saving window appears along with the Intelli-studio main window. If your camcorder has no new files, the pop-up window for saving new files will not appear.

•Depending on your version of Windows, the Windows removable disk window may also appear.

To disconnect the USB cable

To disconnect the USB cable after completing the file transfer, you must follow these steps:

1.Click the “Safely Remove Hardware” icon on the taskbar.

2.Select “USB Mass Storage Device”, and then click “Stop”.

3.If the “Stop a Hardware device” window appears, click “OK”.

4.Disconnect the USB cable from the camcorder and PC.

• Use the provided USB cable. (Supplied by Samsung)

• Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.

• Use the AC power adaptor to power the camcorder when transferring files to your computer.

• When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.

• If you disconnect the USB cable from the PC or the camcorder while

 

transferring files, the data transmission will stop and the data may be

 

damaged.

 

• If you connect the camcorder to a PC via a USB HUB or

 

simultaneously connect the camcorder along with other USB

 

devices, the camcorder may not work properly. If this occurs, remove

 

all USB devices from the PC, and then reconnect the camcorder.

 

• Intelli-studio may not automatically run. If this occurs, access My

 

Computer or Windows Explorer, open the drive that corresponds to

87

your camcorder, find Intelli-studio, and then run iStudio.exe.