Using the touch point function
Using the Touch Point function, you can focus on a small section of the picture. To focus on the particular point, touch the point on the LCD screen. The Touch Point function is available only in the video record mode. For photos, use Magic Touch to perform the same function.page 72
To activate the touch point with a long touch | ||||
45#: | <.JO> | You can activate the touch point by | ||
|
|
| .*/ | pressing a particular point on the LCD |
|
|
|
| |
NOR |
|
|
| screen for about 2 seconds. |
|
|
|
| |
AF |
|
|
|
|
'PDVT
5PVDI1PJOU
"VUP .BOVBM
AUTO |
OK
• The Auto Focus (AF) setting is useful when you operate the zoom function because you might not be able to keep accurate focus manually after the zoom ratio has been changed.
•When the Touch Point function is enabled, you can touch the AF( 
AF ) tab on the LCD screen to set the “Focus” to “Auto.”
•When you specify “Focus: Manual or Touch Point,” “Face Detection” is set to “Off” automatically.
Face Detection
Your camcorder detects a subject’s face and automatically adjusts the brightness and image quality to the optimal settings. Record faces more vividly.
PRECHECK!
Select the record ( 
/ 
) mode by pressing the MODE button. page 27
1.Touch the Menu (
) tab “Face Detection” then the desired submenu item.
2.To exit the menu, touch the Return ( 
) tab.
Submenu items
4IVUUFS | OFF 0GG | AUTO |
&7 | 0O | |
4VQFS$/JUF |
| NOR |
|
|
'PDVT
AUTO
'BDF%FUFDUJPO
OFF
•Off: Disables the function.
•On( 
): Detects faces automatically and sets the optimal recording
values. | 71 |
|
|
