To set the white balance manually
1.Touch the Menu ( 
) tab “White Balance” “Custom WB.”
•The “(
) Set White Balance” indicator is displayed.
2.Fill the screen with a white object, and touch the ( OK ) tab.
•The white balance setting is stored.
3.To exit the menu, touch the Return ( 
) tab.
•The stored white balance setting will be applied the next time you record.
8IJUF#BMBODF
$VTUPN8#
OK
• When setting the white balance manually, the subject must be white, otherwise, your camcorder may not detect an appropriate setting value.
•The adjusted setting remains until you set the white balance again.
•During normal outdoor recording, setting to “Auto” may provide better results.
•Cancel the digital zoom function for clear and precise setting. page 80
•Reset the white balance if light conditions change.
ISO
ISO sensitivity function sets the light sensitivity of the camcorder’s image sensor. A higher ISO setting increases light sensitivity and allows the camcorder to select a higher shutter speed, thus reducing
PRECHECK!
Select the Photo record ( 
) mode by pressing the MODE button. page 27
1.Touch the Menu ( 
) tab “ISO” touch the desired submenu item.
2.To exit the menu, touch the Return ( 
) tab.
Submenu items
• Auto: Sets Aperture to Auto. |
| |||
• | 50( 50 ): Record in a bright place at low sensitivity. | |||
| ISO |
|
|
|
• 100( ISO100 ): Record in a normal situation at normal sensitivity. | ||||
• 200( ISO200 | ): Increases the shutter speed and minimizes noise in images | |||
• | recorded in a dim place. | 2400 ): Record in dim or dark places at | ||
400( 400 | )/800( 800 | )/1600( 1600 )/2400( | ||
| ISO | ISO | ISO | ISO |
high sensitivity. The recorded images may have noise.
J4DFOF | AUTOISO | "VUP | AUTO |
3FTPMVUJPO | ISO50 | 5M | |
8IJUF#BMBODF | ISO100 |
| |
*40 | ISO | ISO | |
| 200 | AUTO |
"QFSUVSF | ISO400 | AUTO | |
|
|
|
High ISO values may cause noise in images. | 65 |
|
