Samsung HMX-U20BP/XIL, HMX-U20RP/EDC, HMX-U20BP/EDC manual Handling a memory card, Notes on use

Models: HMX-U20BP/MEA HMX-U20BP/EDC

1 90
Download 90 pages 21.73 Kb
Page 33
Image 33
Handling a memory card

Handling a memory card

We recommend that you power off before inserting or removing the memory card to avoid data loss.

We cannot guarantee that you can use memory cards formatted by other devices. Be sure to format your memory card using this camcorder.

You have to format newly-purchased memory cards, memory cards with data that your camcorder cannot recognise or with data saved by other devices. Note that formatting erases all data on the memory card.

If you cannot use a memory card that has been used with another device, format it with your camcorder. Note that formatting erases all information on the memory card.

A memory card has a certain life span. If you cannot record new data, you have to purchase a new memory card.

Do not bend, drop, or cause strong impact to the card.

Do not place foreign substances on the memory card terminals. Use a soft dry cloth to clean the terminals if required.

Do not paste anything other than label provided with the card on the label pasting section.

Be careful to keep the memory card out of the reach of children, who might swallow it.

Notes on use

Samsung is not responsible for data loss due to misuse.

We recommend using a memory card case to avoid losing data from moving and static electricity.

After a period of use, the memory card may get warm. This is normal and is not a malfunction.

The camcorder supports SD and SDHC memory cards, giving you a wider choice of cards!

The data storage speed may differ, depending on the manufacturer and production system.

SLC (single level cell) system: faster write speed enabled.

MLC (multi level cell) system: only lower write speed is supported.

For best results, we recommend using a memory card that supports a faster write speed.

Using a lower write speed memory card for recording video may cause difficulties when storing.

You may even lose your video data during the recording.

In an attempt to preserve every bit of the recorded video, the camcorder forcibly stores the video on the memory card and displays a warning:

“Low speed card. Please record at a lower resolution.”

If you are unavoidably using a low speed memory card, the resolution and quality of the recording may be lower than the set value. page 41

The higher the resolution and quality, the more memory the camcorder uses.

27

Page 33
Image 33
Samsung HMX-U20BP/XIL, HMX-U20RP/EDC, HMX-U20BP/EDC, HMX-U20LP/EDC, HMX-U20SP/EDC manual Handling a memory card, Notes on use