Samsung HMX-U20BP/XIL, HMX-U20RP/EDC getting started, Using The Battery, Inserting the battery

getting started

USING THE BATTERY

Purchase extra batteries to allow continuous use of your camcorder.

Inserting the battery

Ejecting the battery

1.Open the battery cover by sliding the OPEN lever as shown in the figure.

2.Insert the battery into the battery slot until it locks.

•Make sure that the SAMSUNG logo is facing up while the battery is placed as shown in the figure.

3.Close the battery slot cover.

1.Open the battery cover by sliding the OPEN lever as shown in the figure.

2.Slide the Battery release switch and pull out the battery.

3.Close the battery cover.

•Use only Samsung-approved batteries. If you use batteries from other manufacturers, there is a danger of overheating, fire or explosion.

•Samsung is not responsible for problems caused by unapproved batteries.

15