Panasonic VDR-D160GN Power supply, Charging the battery, Setup, Charging lamp Lights up Charging

Power supply

Power supply

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this unit.

1	Connect the AC cable to the AC adaptor and the	A
	AC outlet.
2	Put the battery on the battery mount by aligning
	the mark, and then securely plug it in.

≥ The output plug of the AC cable is not completely connected to the AC adaptor socket. As shown in A, there is a gap.

∫Charging lamp Lights up: Charging

Goes off: Charging completed

Flashing: The battery is over discharged (discharged excessively). In a while, the lamp will light up and normal charging will start.

When the battery temperature is excessively high or low, the CHARGE lamp flashes and the charging time will be longer than normal.

Setup

≥Battery charging time (l 20)

≥We recommend using Panasonic batteries. (l 8)

≥If you use other batteries, we cannot guarantee the quality of this product.

≥If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.

18

LSQT1184