With a printer (PictBridge)

8 Select the layout setting on [ PAGE LAYOUT].

STANDARD: Layout specific to the printer

: No frame print

: Frame print

You cannot set page layouts not supported on the printer.

9 Select [PRINT] # [YES] and press the joystick.

The pictures are printed.

Exit PictBridge by disconnecting the USB cable after the pictures have been printed.

When you stop printing halfway

Move the joystick down.

A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

Avoid the following operations during printing. These operations disable proper printing.

Disconnecting the USB cable

Removing the SD card

Switching the mode dial

Turning off the power

Check the settings for the paper size, quality of print, etc. on the printer.

You may not be able to print still pictures recorded with other products.

When the unit is connected directly to the printer, the DPOF settings cannot be used.

Connect the printer directly to this unit. Do not use a USB hub.

With other products

92

LSQT1184

Page 92
Image 92
Panasonic VDR-D160GN manual Select the layout setting on page Layout, Select Print # YES and press the joystick