Power supply

Along with the reduction of the battery capacity, the display will change:

# # # # .

If the battery discharges, then ( ) will flash.

The recordable time will become shorter when you use both the viewfinder and the LCD monitor simultaneously while rotating the LCD monitor frontward to record yourself, etc.

The batteries heat up after use or charging. This unit will also heat up while being used. This is not a malfunction.

Be aware that the operating time of the battery will become shorter in low temperatures. We recommend charging a spare battery for use when recording.

Connecting to the AC outlet

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

1 Connect the AC cable to the AC adaptor and the AC outlet.

2 Connect the DC cable to the AC adaptor.

3 Connect the DC cable to this unit.

Do not use the AC cable for other equipment since the AC cable is exclusively designed for this unit. Do not use the AC cable from other equipment for this unit.

Setup

While the DC cable is connected to the AC adaptor, the battery will not charge.

21

LSQT1184

Page 21
Image 21
Panasonic VDR-D160GN manual Connecting to the AC outlet