Xerox 61xx manual 23. Removing the wire from the tubing

Routine maintenance

•If there is no wire on the spool, use the wire cutters to pull the remaining wire carefully out of the tubing, as shown in figure 5-23.

NOTE: The wire cutter tool needed to perform this procedure is located next to stitcher spool B.

Figure 5-23. Removing the wire from the tubing

•If there is wire on the spool, hold it on the spool and carefully rewind the remaining wire out of the tubing and onto the stitcher spool, as shown in figure 5-24.

5-26 DocuTech 61xx Operator Guide