Xerox 61xx manual Adjusting for paper curl, Measuring the paper curl

Routine maintenance

b.Lower the left and right black levers to the horizontal position, as shown in figure 5-44.

Figure 5-44. Lowering the levers

7. Close the processor door.

Adjusting for paper curl

Each sheet of paper has a natural curve called the curl. Storing or using the paper under humid conditions may increase the curl. When too much curl causes paper handling problems, adjust the decurler in the processor. The decurler flattens the paper after fusing.

Measuring the paper curl

1.Program and print five 1-sided, 8.5 x 11 inch (216 x 279 mm) sheets to the top tray.

NOTE: Keep the image toward you, as shown in figure 5-45.

2.Measure the amount of curl in the prints by holding the five prints in the top center of the short edge.

5-42 DocuTech 61xx Operator Guide