Routine maintenance
11. Close the finisher doors.
Adjusting the binder tape registration
The binder tape knob is used to align the registration of the binder tape to the top edge of a bound book.
This procedure has no effect on the length of the tape, but you should perform this procedure before adjusting the tape length.
To adjust the length, refer to the
Perform the following steps to adjust the binder tape registration.
1.Ensure that the tape guides are clean and free of glue residue.
Refer to the procedure, "Cleaning the binder," in this section.
2.Determine the adjustment amount for the top edge of the book.
3.Open the finisher doors.
4.Measure the distance between the top of the binder tape and the top of the book.
5.Locate the black binder tape knob on the front of the binder drawer.
DocuTech 61xx Operator Guide |
