Problem solving
Figure 6-17. Locating the Q1221, Q1218, and Q1227 sensors
Figure 6-17 shows the following sensors:
1.Q1221 sensor
2.Q1218 sensor and the sensor detector
3.Q1227 sensor and the sensor detector
3.Brush a folded sheet of paper across the sensor to clear any obstruction.
4.Close the finisher doors.
Clearing the camming motor
Clearing the camming motor should be performed only when directed by a Customer Support Center Representative.
NOTE: The fuser camming motor may stall during operation due to a system crash or system power failure. The camming motor must then be manually released.
DocuTech 61xx Operator Guide |
