
|
|
| Technical information |
| Table | ||
|
|
|
|
| Reliable feeds may be | Less reliable feeds may be |
|
Stock | expected | expected | Suggested alternatives |
|
|
|
|
Weight | Substance 16 to 110 (60 to |
| Weights outside the limits |
| 200 g/m2) |
| shown are not |
|
|
| recommended. |
|
|
| Substance 110 (200 g/m2) |
|
|
| must be long grain except 17 |
|
|
| x 11 inch (432 x 279 mm) |
|
|
| substance 110 (200 g/m2) |
|
|
| which must be short grain. |
|
|
|
|
Capacity | 2600 sheets, substance |
|
|
| 20 (75 g/m2) |
|
|
|
|
|
|
Type or | Xerographic bond paper in | Slightly curled paper | Do not use excessively |
condition | good condition | Intermixed weights | curled paper |
|
|
| |
| Drilled stock, fanned | Xerox vellum | Substance 110 (200 g/m2) |
| thoroughly | must be long grain. Do not | |
|
| ||
|
| Full cut tabs | use short grain. |
|
| Label stock | Precut tabs - use tray 1 or 2. |
|
| Adhesive drafting film | Transparencies with a white |
|
| Paper with reinforced edges | stripe, use tray 1 or 2. |
|
|
| |
|
|
| Freshly printed offset prints, |
|
|
| use tray 3. |
|
|
| Refer to the “Using various |
|
|
| stocks” section for any stock |
|
|
| not defined in this guide. |
|
|
|
|
| Table | ||
|
|
|
|
| Reliable feeds may be | Less reliable feeds may be |
|
Stock | expected | expected | Suggested alternatives |
|
|
|
|
Size | 8 x 10 inches to 17 x 11 |
| Smaller or larger sizes |
| inches (203 x 254 mm to |
| cannot be used. |
| 432 x 279 mm) |
|
|
|
|
|
|
Weight | Substance 16 to 110 (60 to |
| Weights outside the limits |
| 200 g/m2) |
| shown are not |
|
|
| recommended. |
|
|
| Substance 110 (200 g/m2) |
|
|
| must be long grain except 17 |
|
|
| x 11 inch (432 x 279 mm) |
|
|
| substance 110 (200 g/m2) |
|
|
| which must be short grain. |
|
|
|
|
Capacity | 550 sheets, substance 20 |
|
|
| (75 g/m2) |
|
|
|
|
|
|
DocuTech 61xx Operator Guide |