Xerox 61xx manual Satisfaction guide for paper tray

Technical information

Stock satisfaction guides

Table 7-5. Satisfaction guide for paper trays 1 and 2

	Reliable feeds may be	Less reliable feeds may be
Stock	expected	expected	Suggested alternatives
Size	8 x 10 inches to 9 x 14		Stock smaller than 8 x 10
	inches (203 x 254 mm to		inches cannot be used.
	229 x 356 mm)		For stock larger than 9 x 14
			inches (229 x 356 mm), refer
			to the tray 3 satisfaction
			guide.
Weight	Substance 20 to 110 (75 to	Substance 16 to 19 (60 to 72	Weights outside the limits
	200 g/m2)	g/m2)	shown are not
			recommended.
			Substance 110 (200 g/m2)
			must be long grain. Do not
			use short grain.
Capacity	Tray 1 - 1100 sheets,		For greater capacity, use
	substance 20 (75 g/m2)		Tray 3.
	Tray 2 - 600 sheets,
	substance 20 (75 g/m2)
Type or	Xerographic bond paper in	Slightly curled paper	Do not use excessively
condition	good condition	Intermixed weights	curled paper
	Drilled stock, fanned	Transparencies	Substance 110 (200 g/m2)
	thoroughly		must be long grain. Do not
	Tab stock in perfectly flat	Label stock	use short grain.
	condition	Adhesive drafting film	Use transparencies with a
		Paper with reinforced edges	white stripe.
			Freshly printed offset prints,
			use tray 3.
			Refer to the “Using various
			stocks” section for any stock
			not defined in this guide.

Table 7-6. Satisfaction guide for paper tray 3

	Reliable feeds may be	Less reliable feeds may be
Stock	expected	expected	Suggested alternatives
Size	8 x 10 inches to 17 x 11		Smaller or larger sizes
	inches (203 x 254 mm to		cannot be used.
	432 x 279 mm)

7-8 DocuTech 61xx Operator Guide