Routine maintenance
Figure 5-40. Locating the binder tape knob
The knob is spring loaded and moves in increments to change the location of the binder tape. Each increment equals a change of 0.1mm, up or down, on the edge of the book. One full rotation of the knob is equal to 0.04 inch (1mm).
6.Pull the knob toward you to rotate it for the adjustment.
7.Adjust the tape position by performing one of the following steps:
•Pull the knob and rotate it clockwise to move the tape toward the top edge of the book, as shown in figure
DocuTech 61xx Operator Guide |
