Xerox 61xx manual Stitcher satisfaction guide

Technical information

Table 7-13. Stacker capacity

	Reliable stacking may be	Less reliable stacking may
Stock	expected	be expected	Suggested alternatives
Stacker	Unfinished sheets:		To allow a continuous run,
capacity	3300 sheets, substance		unload outer stack before
			inner stack reaches capacity.
	16 (60 g/m2)
	3000 sheets, substance
	20 (75 g/m2)
	2500 sheets, substance
	24 (90 g/m2)
	1875 sheets, substance
	32 (120 g/m2)
	1360 sheets, substance
	110 (200 g/m2)
Type or	Xerographic bond paper in	Slightly curled paper	Do not use excessively curled
condition	good condition		paper.
	Drilled paper		Transparencies must contain
			some opaque sheets to avoid
			finisher jams.
			Stock not defined here is
			included in the “Using various
			stocks” section in this guide.

Table 7-14. Stitcher satisfaction guide

	Reliable stacking may be	Less reliable stacking may
Stock	expected	be expected	Suggested alternatives
Size	8 x 10 inches to 9 x 14		Use the top tray for larger
	inches (203 x 254 mm to		sizes
	229 x 356 mm)
Weight	Substance 16 to 110 (60 to		Weights outside the limits
	200 g/m2)		shown are not recommended.
Set size limit	Collated: Up to 65 sheets	Collated: Up to 70 sheets of	Reduce the paper weight to
due to copy	of substance 20 (75 g/m2)	substance 20 (75 g/m2)	enable stitching more sheets
paper weight	or 0.28 inch (7 mm) thick		per collated set.
	sets		Check the stitch quality.
	Uncollated: 50 copies
	maximum per stitch 0.28
	inch (7 mm) thick sets
Stacker	Stacker capacity adjusts		To allow a continuous run,
capacity	automatically to suit		unload outer stack before
	various set sizes		inner stack reaches capacity.

7-16 DocuTech 61xx Operator Guide