Xerox 61xx manual Limitations, Common US paper sizes

Technical information

With the introduction of other DFA-complaint finishing devices for use with the DocuTech 61xx family of printers, additional paper stock sizes can be handled by the finishing devices, both straight from the Bypass Transport or rotated.

Limitations

Do not rotate paper sizes that will not fit through the DocuTech 61xx Bypass Transport to a third party finishing device.

Before creating a document to be rotated by the Bypass Transport, set the paper stock size required to fit within the limitations detailed in the following tables and as follows:

•The diagonal dimension of the paper stock must be equal to or less than 18 inches (457 mm).

•The paper stock must be within the paper stock size parameters of the DocuTech 61xx printer paper trays.

Refer to the DocuSP controller on-line help system for information on setting finisher devices and finisher profiles to enable rotation to a third party finisher.

Table 7-17. Common US paper sizes

					Comment
Common size	Inches x	Millimeter	Diagonal in	Can be	(similar to or
name	inches	equivalent	inches	rotated	the same as)
	8.0 x 10.75	203 x 273	13.40	YES
US Letter/ US	8.5 x 11.0	216 x 279	13.90	YES	2-up of US 5.5
A-size					x 8.5 in.
					(statement)
	9.0 x 12.0	229 x 305	15.00	YES	2-up of US 6.0
					x 9.0 in.
					(common
					“book” size)
US Legal	8.5 x 14.0	216 x 356	16.38	YES	ISO Foolscap
	9.0 x 14.0	229 x 356	16.64	YES	2-up of US 7.0
					x 9.0 in.
	9.0 x 15.0	229 x 381	17.49	NO*	2-up of US 7.5
					x 9.0 in.
	10.5 x 14.5	267 x 368	17.90	NO*	2-up of US
					7.25 X 10.5 in.
					(Executive)
US Ledger/	11.0 x 17.0	279 x 432	20.25	NO	2-up of US 8.5
US B-Size					x 11.0 in.
					(Letter)

7-20 DocuTech 61xx Operator Guide