Xerox 61xx manual 16. Top tray satisfaction guide, 15. Binder satisfaction guide

Technical information

Table 7-15. Binder satisfaction guide

	Reliable stacking may be	Less reliable stacking may
Stock	expected	be expected	Suggested alternatives
Set size limits	Maximum collated:	125 sheets of substance 16	Consider stitching for set sizes
	125 sheets of substance	(60 g/m2)	smaller than 15 sheets (or
			equivalent thickness).
	20 (75 g/m2) or equivalent
	thickness		Reduce the number of sheets
	Minimum collated:		to maintain a maximum set
			thickness of 0.5 inch (13 mm)
	15 sheets of substance 20		when using heavier than
	(75 g/m2) (7 sheets with		substance 20 (75 g/m2) for
	index covers) or		main body or inserts.
	equivalent thickness
	Maximum uncollated:
	100 sheets of substance
	20 (75 g/m2)
	Minimum uncollated:
	15 sheets of substance 20
	(75 g/m2) (7 sheets with
	index covers) or
	equivalent thickness
Stacker	Delivers 12 sets inboard		To allow continuous run,
capacity	and 12 sets outboard		unload outer stack before
			inner stack reaches capacity.
Type or	Xerographic bond paper in	Slightly curled paper	Avoid the following:
condition	good condition		•	Coated papers
	Drilled paper		•	Drilled stock with
				reinforced edges
			•	Transparencies as inserts
			•	Excessively curled paper
			• Never-tear paper
			Stock not defined here is
			included in the “Using various
			stocks” section in this guide.

Table 7-16. Top tray satisfaction guide

	Reliable stacking may be	Less reliable stacking may
Stock	expected	be expected	Suggested alternatives
Size	8 x 10 inches to 11 x 17	Intermixed sizes	Smaller or larger sizes cannot
	inches (203 x 254 mm to		be used.
	279 x 432 mm)

7-18 DocuTech 61xx Operator Guide