System components

8.Decurler lever

9.Dry Ink Waste container

The paper trays

There are three paper trays which can hold different sizes, types, and colors of stock for printing jobs. Paper tray capacities are as follows:

Tray 1: 1,100 sheets of substance 20 (75 g/m2)

Tray 2: 600 sheets of substance 20 (75 g/m2)

Tray 3: 2,600 sheets of substance 20 (75 g/m2)

The electrical module

The system circuit breakers are located behind the door of the electrical module. To remove all power from the printer, all three circuit breakers must be in the down position. For the printer to operate properly, all three circuit breakers must be in the up position.

The dry ink cartridge

Dry ink is the material that forms the black image on prints. Dry ink is contained in the dry ink cartridge. When directed by a message on the controller, you must replace the dry ink cartridge.

For dry ink cartridge replacement, refer to the "Routine maintenance" chapter.

The photoreceptor

In the xerographic process, the image to be printed is first developed on the photoreceptor. When print stock is brought into contact with the photoreceptor, the image is transferred to the print stock.

4-6

DocuTech 61xx Operator Guide

Page 34
Image 34
Xerox 61xx manual Paper trays, Electrical module, Dry ink cartridge, Photoreceptor