Samsung HMX-U20RP/XIL, HMX-U20RP/EDC, HMX-U20BP/EDC troubleshooting, Symptom, Explanation/Solution

troubleshooting

Recording

Symptom			Explanation/Solution
		• There is no more free space for recording on the storage media.
			Back up important files on your PC and format the storage media
The recording stops automatically.		•	or delete unnecessary files.
			If you use a memory card with a low writing speed, the camcorder
			automatically stops recording videos and the corresponding
			message appears on the LCD screen.
When recording a subject		•
illuminated by bright light, vertical			The camcorder is unable to record these levels of brightness.
lines appear.
When the screen is exposed to		•
direct sunlight during recording,			Do not leave the camcorder with the LCD screen exposed to direct
the screen turns red or black for an			sunlight.
instant.
		•	Set the "Beep Sound" to "On."	page 55
The beep sound is not heard.		• The beep sound is temporally off while recording videos.
		• When the Audio/Video cable is connected to the camcorder, the
			beep sound automatically turns off.
There is a time difference between		•	On your camcorder, there may be a slight time delay between the
the point where you press
	) button		point when you press Recording start/stop (		) button and
Recording start/stop (
			the actual point where the recorded video starts/stops. This is not
and the point where the recorded
			an error.
video starts/stops.
		•	Set your camcorder to Record mode. page 20
		• Release the lock on the write-protection tab of the memory card if
You cannot record a photo		•	set.
			The storage media is full. Use a new memory card or format the
			storage media. page 52
			Or delete unnecessary images.	page 46

76