troubleshooting
SYMPTOMS AND SOLUTIONS
If these instructions do not solve your problem, contact your nearest Samsung authorised service centre.
Power
Symptom |
| Explanation/Solution |
| • | Charge the battery. |
| • If you use an AC power adaptor, make sure it is properly | |
The camcorder does not turn on. |
| connected to the wall outlet. |
| • Unplug the AC power adaptor, and reconnect the power supply to | |
|
| the camcorder before turning it on. |
|
| |
| • Is “Auto Power Off” set to “5 Min”? If no button is pressed for | |
|
| about 5 minutes, the camcorder automatically turns off. To disable |
The power automatically turns off. |
| this option, change the setting of "Auto Power Off" to "Off." |
| page 56 | |
|
| |
| • The battery is almost discharged. Charge the battery. | |
| • Use the AC power adaptor. | |
|
| |
Power cannot be turned off . | • Unplug the AC power adaptor, and then reconnect the power | |
| supply to the camcorder before turning it on. | |
|
| |
•The temperature is too low.
•The battery is not fully charged. Recharge the battery.
The battery discharges quickly. • The battery reached the end of its lifespan and cannot be
|
| recharged. |
|
| Contact your nearest Samsung authorised service centre. |
|
|
|
| Display |
|
|
|
|
| Symptom | Explanation/Solution |
|
|
|
| The recorded image is wider or | • You should check the resolution before you record. |
| narrower than the original image. | pages 41, 42 |
|
|
|
| Unknown indicator appears on the | • A warning indicator or message appears on the screen. |
| screen. | pages 72, 73 |
|
|
|
| An after image remains on the LCD | • This occurs if you disconnect the AC power adaptor before turning |
| screen. | the power off. |
|
|
|
| The image on the LCD screen looks | • Ambient light is too bright. Adjust the brightness and angle of the |
74 | dark. | LCD. |
|
| |
|
|
|
