Additional information

HOW TO USE ARM BAND : BASED ON LEFT- 3 Insert and loop the other end of the strip from behind the holder

ARM USE (HMX-W350 ONLY)

ring, and fasten the velcro.

1Insert and loop the velcro strip (from opposite end to the logo)

through the left ring (viewed from the rear side of the holder) as shown below and fasten it.

2Adjust the anti-slip ring as shown below, to prevent getting loose.

Loosen the band enough before wearing, and adjust it to fit appropriately.

After the 1st step

Anti-slip ring

Appendixes 98