Basic operation of the product

SWITCHING THE INFORMATION DISPLAY MODE

You can display or hide on-screen information.

Press the [Display ( )] button in the standby mode.

• The full and minimum display modes alternate.

[579Min] STBY

STBY

USING THE FLOATING BUMPER (HMX-W350 ONLY)

When you put the product into the included floating bumper, the product - with the floating bumper - will float on water. You can record confidently knowing that the product will not sink, even if you accidently drop or release it while recording under water. In addition, the product with the floating bumper can withstand strong shocks.

USING THE WEARABLE BAND (CHEST BAND, ARM BAND) (HMX-W350 ONLY)

When you enjoy outdoor sports activities such as skiing or skydiving, the included wearable arm band or chest band lets you bring the product with you. To use, insert the product with the floating bumper into the product holder, attach the chest band or arm band to the holder, and then strap the arm band or chest band around your arm or chest respectively. ￿pages 98~99

Be careful when using the chest band. Because the chest band holds the product against your chest, if you fall forward while recording, you can suffer a chest injury.

Product holder

<Full display mode>

<Minimum display mode>

Warning indicators and messages may appear depending on the recording conditions. ￿pages 87~89

Getting started 32

Do not expose the floating bumper to temperatures over 50˚C (122˚F). If not, it may cause deformation.

Do not place the bumper in direct sunlight or in a closed vehicle for a long time in summer. Do not put the bumper into hot water over 50˚C (122˚F).

After using the bumper, store it in a cool place (under 20˚C (68˚F)) away from direct sunlight.