Getting ready to start recording

INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)

2

 

1

To insert a memory cardTo eject a memory card

1 Press the power button to turn off the product and then slide the

1 Press the power button to turn off the product and then slide the

[Open/Close] lever in the direction of the arrow and open the memory card cover as shown in the figure above.

2Insert the memory card into the card slot until it softly clicks.

Make sure that the terminals portion of the card is facing left and the product is placed as shown in the figure.

3Close the cover, and then slide the [Open/Close] lever in the direction of the arrow as show in the figure.

[Open/Close] lever in the direction of the arrow and open the memory card cover as shown in the figure above.

2Gently push the memory card to eject it.

3Close the cover, and then slide the [Open/Close] lever in the direction of the arrow as show in the figure.

• To avoid the data loss, turn off the product by pressing the [Power ( )] button before inserting or ejecting the memory card.

If you eject the memory card from the product while it is on, the product turns off.

Be careful not to push the memory card too hard. The memory card may suddenly pop out.

Your product supports only micro SD, micro SDHC, and micro SDXC cards.

Card compatibility with the product may vary depending on the manufacturer and the type of memory card.

Getting started 25