Samsung HP-S5073, HP-S4273 manual Connecting a VCR, Connecting an S-VHS VCR

Models: HP-S4273 HP-S5073

1 76
Download 76 pages 48.22 Kb
Page 11
Image 11

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9-10). Skip step 1 if you have not yet connected to an antenna or a cable system.

VCR Rear Panel

2

TV Rear Panel

5 Audio Cable (Not supplied)

4 Video Cable (Not supplied)

1.

Unplug the cable or antenna

 

from the back of the TV.

2.

Connect the cable or antenna

 

to the ANT IN terminal on the

 

back of the VCR.

3.

Connect an Antenna Cable

 

between the ANT OUT

 

terminal on the VCR and the

 

ANT1 IN(AIR) or ANT2 IN

 

(CABLE) terminal on the TV.

4.

Connect a Video Cable

 

between the VIDEO OUT jack

 

on the VCR and the AV IN 1

 

[VIDEO] jack on the TV.

5.

Connect Audio Cables

 

between the AUDIO OUT

 

jacks on the VCR and the

 

AV IN 1 [R-AUDIO-L] jacks

 

on the TV.

3Antenna Cable (Not supplied)

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

If you have a “mono”

(non-stereo) VCR, use a

Y-connector (not supplied) to

hook up to the right and left

audio input jacks of the TV.

If your VCR is stereo, you

must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Rear Panel

VCR Rear Panel

3 Audio Cable (Not supplied)

2S-Video Cable (Not supplied)

1 Antenna Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Each S-VHS VCR has a different back panel configuration.

When connecting an S-VHS VCR, match the color of the connection terminal to the cable.

Some games may be displayed with a cut off picture when the TV is connected to a game player.

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 1 [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.

English-11

Page 11
Image 11
Samsung HP-S5073, HP-S4273 manual Connecting a VCR, Connecting an S-VHS VCR