Connecting the Wireless Mouse
Your VAIO® computer is supplied with a wireless mouse. Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse. To connect your wireless mouse, it must be within 11 inches of the computer.
When attempting to connect the wireless mouse, confirm that the AA batteries (supplied) are properly inserted into the mouse before your computer is turned on.
1.Press the CONNECT button, located on the bottom of the infrared receiver.
2.Turn the wireless mouse over and slide the power button to the ON position.
3.Press the CONNECT button on the bottom of the mouse.
Connecting the mouse
Additional information about using a wireless mouse
A wireless mouse requires unobstructed communication with the infrared receiver for proper operation.
To maintain good communication, operate your wireless mouse within 2 feet of the VAIO® computer.
Confirm that the supplied AA batteries are properly installed.
Press the CONNECT button located on the bottom of the infrared receiver first, and then press the Connect button on the bottom of the mouse.
Verify the infrared receiver is free of obstructions that may prevent proper operation.
Avoid using
Do not place metal furniture near your computer or wireless mouse, as this may create interference, causing your mouse to stop working properly.
A wireless mouse requires an appropriate surface texture in order to provide precision pointing and tracking.
Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns.
Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing.
Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery. Using incompatible batteries or mixing used/new batteries can damage the mouse.
Page 38
