Sony VGCRA930, VGCRA830 specifications To connect the remote sensor control

To connect the remote sensor control

1.Plug the remote sensor control's cable into either jack (1 or 2) located on the back of the remote sensor.

When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box functions with your remote control.

Connecting the remote sensor and remote sensor control

*This supplied accessory may be different from the unit shown here.

2.Remove the adhesive tape cover, located on the bottom of the remote sensor control.

3.Press the remote sensor control onto the set-top box near the infrared port, without covering the port.

If the remote sensor control covers the infrared port on the set-top box, you cannot use the remote control supplied with the set-top box.

Attaching the remote sensor control cable to a cable or satellite set-top box

The remote sensor unit must be visible in a line-of-sight with your remote control in order to function properly.

Page 57