Memorizing the Channels
Your TV can memorize and store all of the available channels for both 
or CH 
button to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an air or a cable system).
T V | Channel |
| |
|
|
|
|
| Antenna | : Air | √ |
| Auto Program |
| √ |
| Channel Manager |
| √ |
| Name |
| √ |
| Fine Tune |
| √ |
| Signal Strength |
| √ |
| † More |
|
|
Move | Enter | Return | |
|
|
|
|
T V | Channel |
| |
Antenna : |
|
|
|
| Air |
| |
Auto Program |
| Cable |
|
Channel Manager |
|
|
|
Name |
|
|
|
Fine Tune |
|
|
|
Signal Strength |
|
|
|
†More
Move 
Enter 
Return
1.Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
2.Press the ENTER button select “Antenna”.
Press the … or † button to select “Air” or “Cable”, then press the ENTER button. Press the EXIT button to exit.
Storing Channels in Memory (Automatic Method)
T V | Channel |
| |
| Antenna | : Air | √ |
| Auto Program |
| √ |
| Channel Manager |
| √ |
| Name |
| √ |
| Fine Tune |
| √ |
| Signal Strength |
| √ |
| † More |
|
|
| Move | Enter | Return | |
|
|
|
| |
T V | Auto Program | |||
Select the antennas to memorize. | ||||
| Air |
| Start | |
| Cable |
| Start | |
| Air + Cable |
| Start | |
| Move | Enter | Return | |
|
|
|
| |
T V | Auto Program | |||
| Select the cable system. |
|
| |
|
|
|
|
|
| STD |
|
|
|
| HRC |
|
|
|
| IRC |
|
|
|
| Move | Enter | Return | |
|
|
|
|
|
| Auto Program |
|
| |
Auto Program in progress. |
|
| ||
|
| Cable Channel 67 | ||
| Stop |
|
| |
| Enter | Return | ||
|
|
|
|
|
1.Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
2.Press the … or † button to select “Auto Program”, then press the ENTER button.
3.Press the … or † button to select the antenna connection, then press the ENTER button.
➢Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Air+Cable: “Air” and “Cable” antenna signals.
➢If the antenna is connected to ANT 1 IN (CABLE), select “Cable” and if it is connected to ANT 2 IN (AIR), select “Air”.
➢If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.
➢If you selected “Air”, then go to step 5.
4.Select the correct signal source (STD, HRC, and IRC) by pressing the … or † button, then press the ENTER button.
➢STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
5.The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit.
➢The TV must be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
➢• All available DTV and analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
You can also press the AUTO PROG. button on the remote control to bring up the Auto Program menu.
