Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
i | Menu language, Channels |
and Time will be set. | |
| Start |
Plug & Play
Select Home Mode when installing this TV at home.
Shop |
| Home |
|
|
| ||
Move | Enter | Skip | |
|
|
|
|
|
|
|
|
| Plug & Play |
| |
Select the language of the OSD. |
| ||
Menu Language | : |
|
|
English |
| ||
|
| Spanish |
|
|
| French |
|
Move | Enter | Skip | |
|
|
|
|
| Plug & Play |
| |
Select the antennas to memorize. |
| ||
Air |
| Start |
|
Cable |
| Start |
|
Air + Cable |
| Start |
|
Move | Enter | Skip | |
|
|
|
|
| Plug & Play |
|
Select the cable system. |
| |
STD |
|
|
HRC |
|
|
IRC |
|
|
Move | Enter | Skip |
1.Press the POWER button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed. Press the ENTER button, then “Select Home Mode when installing this TV at home.” menu is automatically displayed.
2.Press the œ or √ button to select “Shop” or “Home”, then press the ENTER button. “Select the language of the OSD” menu is automatically displayed.
➢The default selection is “Home”.
➢We recommend setting the TV to Home mode for the best picture in your home environment.
➢Shop mode is only intended for use in retail environments.
➢If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side panel of the TV for five seconds to return to Dynamic (Home) mode.
3.Press the ENTER button to enter the language.
Press the … or † button to select language, then press the ENTER button. “Select the antennas to memorize.” menu is automatically displayed.
4.Press the … or † button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.
➢If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected to ANT 1 IN (CABLE), select “Cable”.
➢If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the “Air + Cable”.
➢In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the … or † button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your particular area.
Continued...
